Materials & Construction

• Fabric: Made with 100% recycled polyester, giving it eco-credentials.

• Finish: Treated with a C0 Durable Water Repellent (DWR) finish to add stain or light-rain resistance.

• Inner: Brushed inner face (fleece-style) for wearer comfort against the skin.

• Fit/Design: Ribbed, stretchy cuffs for comfort and movement; quarter-zip design gives adjustable ventilation.

Visibility, Certification & Safety

• High-visibility: Available in Hi-Vis Orange (and Hi-Vis Yellow in sibling model RCT804).

• Reflective Tape: It features segmented or structured high-visibility tape with shoulder braces on front and back—improving visibility from multiple angles.

• Certification:

  • If in Hi-Vis Orange version: Certified to EN ISO 20471:2013 + A1:2016 Class 3 (maximum for high-visibility workwear) and RIS-3279-TOM Issue 2:2019 (rail-industry specification) for orange variant.

  • Certified to 25 wash cycles, maintaining its high-visibility compliance after industrial washing.

Functional Features & Use

• Comfort & layering: As a fleece style quarter zip, it works well as a mid-layer under outer shells (for cold/wet conditions) or on its own when less weather protection is required.

• Ventilation: The quarter-zip allows the wearer to regulate temperature when active or when moving between indoor/outdoor environments.

• Fabric Stretch & Movement: The ribbed cuffs and flexible design support mobility, which is important for active work roles.

• High Visibility Role: Designed for workers on road maintenance, rail (Orange Only), highways or general construction where Hi-Vis Class 3 is required.

• Sustainability: The use of 100% recycled polyester and attention to environmentally safer finishes (C0 DWR rather than PFAS heavy) suggests PULSAR’s intent to reduce environmental footprint.

Strengths & Considerations

Strengths:

• High-visibility Class 3 certification means it meets strict safety standards in visibility zones.

• Quarter-zip design offers more flexibility than a full zip or pullover, good for layering systems.

• Comfortable fleece-style inner means good wearability over longer shifts.

• Sustainable materials give a plus for corporate responsibility and eco-conscious purchasing.

Considerations:

• It is not a waterproof outer shell — it’s a mid-layer. So in heavy rain you’ll still need an outer waterproof jacket.

• Hi-Vis orange variant may be required for certain environments (rail, highways) rather than yellow—so ensure you pick the correct variant for your regulation.

• Because it’s designed as a mid-layer, features like taped seams, high hydrostatic head, etc (which you’d see in outer shells) are not included here—it focuses on visibility and comfort rather than full weatherproofing.

Summary

If you’re looking for a functional, high-visibility mid-layer that balances safety certification, comfort and sustainability, the PULSAR REACT RCT805 & 804 is a strong choice. Particularly suited for active roles in outdoor or semi-outdoor environments (rail (Orange), highways, utilities) where you’re visible and mobile, but not necessarily exposed to heavy rain all the time. If you anticipate needing full waterproof protection, you’d pair it with a waterproof shell (such as RCT800/RCT801) on top.

A stylish and warm mid-layer, crafted from 100% recycled polyester. This versatile, eco-conscious essential offers extra-soft comfort for when the temperature drops.

• Made from 100% recycled polyester
• Smooth face fabric with brushed inner creating a comfortable feel next to the skin
• Soft fleece chin guard
• Inner placket on zip for comfort
• Stylish, reversed zip for clean lines and ease of donning the garment
• High visibility, segmented tape with shoulder braces on front and back
• Ribbed, stretchy cuffs
• C0 Durable Water Repellent (DWR) finish for stain resistance
• RIS-3279-TOM Issue 2:2019 (Orange only)

Materials & Construction

• Built with 80% recycled polyester outer fabric.

• Mono-material construction for improved end-of-life recyclability.

• Same 2-layer hydrophilic membrane fabric as RCT800 (waterproof + breathable).

• Bluesign® C0 DWR treatment.

Performance & Protection

• Hydrostatic head: 20,000 mm — matches RCT800’s performance.

• Breathability: 21,000 g/m² plus RET around 6 (and 8.3 with liner) — same high standard.

• Fully taped seams.

Design & Functional Features

• Helmet-compatible removable hood with 3-point adjustment and curved stiff peak.

• Waterproof 2-way zip, internal storm flap, chin guard.

• Brushed collar lining, tactile zip pulls for ease of use with gloves.

• Adjustable Velcro cuffs, curved hem with shock cord for rear coverage (especially useful when bending or reaching).

Certification & Visibility

• EN ISO 20471 Class 3 (Hi-Vis Orange).

• EN 343 Class 4:4:X waterproof/breathable.

• RIS 3279-TOM certification (rail-industry specification) — makes the jacket suitable for use on rail infrastructure, where orange Hi-Vis garments are specified to avoid confusion with yellow signalling.

Use Case Summary
Specifically great for rail, transport or road-works environments where orange Hi-Vis is mandated. Offers the same elite weather-protection and sustainability credentials as the RCT800, but in the visibility colour required for those sectors.

Key Differences & Considerations

• Colour / Visibility: RCT800 is Hi-Vis Yellow; RCT801 is Hi-Vis Orange. Choose according to your site or industry visibility requirements.

• Sector / Certification: RCT801 includes RIS 3279-TOM certification for rail – if you’re working in rail/track environments, that may make the RCT801 the compliance-choice.

• All other technical specs (waterproofing, breathability, recycled material content, design features) are essentially identical between the two models.

• Sustainability: Both jackets are built with 80% recycled polyester outer and mono-material structure for end-of-life recyclability. If environmental credentials matter to you or your organisation, both deliver.

• Practical Fit & Function: Both include helmet-compatible hood, taped seams, highly rated waterproofing and breathability, adjustable fit features. So the decision is largely driven by required Hi-Vis colour / workplace standard.

A lightweight jacket with top tier breathability and waterproofing ratings. This highly recyclable garment has 80% recycled polyester outer fabric and a bluesign® C0 Durable Water Repellent (DWR) treatment

Material & Construction

• Outer Fabric: 80% recycled polyester — this helps reduce environmental impact.

• Reinforcements: The knee and hem panels use a more robust, dark grey polyester oxford fabric to boost durability in high-abrasion zones.

• Waterproofing System:

  • Uses a 2-layer fabric with a non-porous hydrophilic membrane for a balance of waterproofing and breathability.

  • Hydrostatic head: 20,000 mm, meaning it can withstand very heavy rain.

  • Taped seams throughout to prevent water ingress.

• DWR Treatment: The fabric is treated with a bluesign® C0 durable water repellent (DWR), which is more environmentally friendly.

Breathability & Comfort

• Breathability Rating: 21,000 g/m² — this high breathability helps manage sweat and body heat, especially during active work.

• RET (Water Vapor Resistance):

  • ~6.16 in standard use

  • ~8.3 when combined with a liner — both values are low enough to exceed EN 343 Class 4 for breathability.

• Fit: Unisex — designed to fit over existing trousers, so there’s some room allowance.

• Waist: Elasticated waistband with a draw-cord for adjustable, secure fit.

Functional Features

• Reflective Tape:

  • One band of 5 cm wide reflective tape around the thigh

  • Two bands (5 cm each) around the lower leg — improves visibility in low light.

• Waterproof Zips:

  • At the hip — these allow you to access pockets on your base layer (i.e., the pants underneath) without removing the over-trousers.

  • At the hem — with an expanding gusset so you can more easily pull the trousers over your boots.

• Cargo Pockets: Thigh cargo pockets with press-stud closures provide practical storage.

• Durability: Reinforced knees and hem (as noted) to stand up to regular wear in rough environments.

Certifications & Compliance

• EN 343:2019 Class 4.4.X — for waterproofness and breathability.

• EN ISO 20471:2013 + A1:2016, Class 2 — guaranteeing a standardized level of high-visibility.

• RIS-3279-TOM:2019 (Orange Only) — this is a rail-industry standard, making these overtrousers suitable for rail work.

• Wash Durability: Certified for repeated industrial washing (25 wash cycles) under EN ISO 20471.

Use Cases & Benefits

• Ideal For: Workers in construction, rail (Orange Only), utilities, and other sectors where weather protection and high visibility are critical.

• Wet Weather Protection: Excellent for rainy, windy, or damp work environments, keeping the lower body dry.

• Safety: The reflective tape enhances visibility in low-light or high-risk zones.

• Sustainability: Recycled fabric plus mono-material design (if applicable) improves recyclability and lowers environmental footprint.

• Practicality: Easy to layer over regular workwear; hip access zip lets you reach trousers underneath; cargo pockets provide storage.

Strengths & Considerations

Strengths:

• High waterproof rating + taped seams = very reliable protection

• Excellent breathability for active wear

• Good visibility with reflective tape

• Rail-compliant (RIS 3279) — important for industry-specific roles (Orange Only)

• Durable reinforcements at wear points

Considerations:

• As over-trousers, they are meant to go over rather than replace existing pants

• Elastic waistband and drawcord may feel less structured than a fixed waistband

• Reflective tape is less than what you’d find on some Class 3 trousers/garments (only two lower leg bands)

Summary

The PULSAR REACT RCT803 & 802 is a high-performance, hi-vis waterproof over-trouser engineered for professional use. It balances serious weather protection (20,000 mm hydrostatic head, taped seams) with strong breathability (21,000 g/m², low RET), all while using 80% recycled materials. With strong certifications (EN 343, EN ISO 20471, RIS-3279), reinforced construction, and practical features like cargo pockets and boot-friendly leg zips, it’s very well-suited for construction, rail, or other high-risk, wet-weather job sites.

Lightweight, highly waterproof and breathable overtrousers designed to provide wet weather protection over workwear, keeping you dry and visible in a downpour.

YKK zips to interact with PULSAR- P522 & PR505 Foul Weather Coveralls.
Anchorage fastening points at the ankles, cuffs and back of the neck for a more precise fit.

Knitted cotton cuffs and ankles for extra comfort.

• Thermally applied RFX Reflective Tape with segmented comfort trim shoulder braces
• PULSAR- reflective blue piping and chevron detail
• YKK- 2-way zip concealed by double velcro storm flap
• Neoprene inner cuff, underarm ventilation and chin guard
• Two internal A4 sized poachers pockets
• Interacts with PULSAR- Body Warmers (P422/PR498), Fleece Jackets (P507/PR508) and Soft Shell Jackets (P534/PR535)
• Suitable for use in the automotive industry (car safe).

Fabric

• Highly breathable 3 layer laminate technology
• EN Standards
• EN ISO 20471 Class 3
• EN343 Class 4:3

• Original PULSAR chevron design 3M Scotchlite Reflective Tape.
• Rear and thigh pockets with reflective piping on flaps.
• Elasticated waistband and draw cord for a more precise fit.
• Gusseted at hem of legs with waterproof zips for ease over work boots, as well as preventing excess dirt from jamming zips.
• Slit access hip pockets allow access to garments underneath.
• Class 3 waterproof and breathable 300 denier PU polyester outer fabric.

Conforms to the following:

• EN ISO 20471 Class 2
• EN343 Class 3:3

It also features a full length YKK two-way zip- that is concealed by the double Velcro storm flap and underarm ventilation, chin protector and a unique flip-out ID window. It offers plenty of storage with a waterproof internal zip pocket that is ideal for safely storing a mobile phone and an A4-size internal poachers pocket.

The Pulsar PR705 rail-spec storm coat conforms with EN ISO 20471 Class 3, EN343 Class 3:3 and RIS-3279 Rail Standard. Available in sizes 8 to 26.

It also features a full length YKK two-way zip- that is concealed by the double Velcro storm flap and underarm ventilation, chin protector and a unique flip-out ID window. It offers plenty of storage with a waterproof internal zip pocket that is ideal for safely storing a mobile phone and an A4-size internal poachers pocket.

The Pulsar P704 storm coat conforms with EN ISO 20471 Class 3 and EN343 Class 3:3. Available in sizes 8 to 26.

Conforms to EN ISO 20471 and RIS-3279 Rail Standard.